ماژول ارتباطی پی ال سی زیمنس سری S7-1200

SIMATIC S7-1200 Communication modules

ماژول ارتباطی پی ال سی زیمنس سری S7-1200

شرکت Siemens یکی از تولیدکنندگان معروف PLC است. PLC های Siemens به عنوان محصولاتی با کارایی بالا و کیفیت بی نظیر شناخته شده‌اند. آنها برای استفاده در صنایع، کارخانجات و سیستم های الکتریکی مورد استفاده قرار می‌گیرند. شرکت Siemens از سابقه و آوازه طولانی در صنعت برق برخوردار بوده و محصولات با کیفیت و قابلیت اعتماد را تولید می‌کند.

در صورتی که علاقه‌مند به خرید تجهیزات اتوماسیون صنعتی Siemens هستید،

می‌توانید به فروشگاه کالای برق ال جی نمایندگی PLC زیمنس مراجعه کنید.

لیست قیمت ماژول ارتباطی پی ال سی زیمنس سری SIEMENS S7-1200

جهت خرید و اطلاع از لیست قیمت پی ال سی زیمنس با مهندسین فروش کالای برق ال جی نمایندگی فروش محصولات SIEMENS تماس بگیرید.

برای اینکه مناسب ترین و بهترین قیمت ماژول ارتباطی پی ال سی زیمنس سری SIEMENS S7-1200 یا لیست قیمت ماژول ارتباطی پی ال سی زیمنس سری S7-1200 را بخواهید میتوانید با ما از طریق شماره - 02133948923 - 09107872779 - 09934164649  در ارتباط باشید.

نمایندگی ماژول ارتباطی پی ال سی زیمنس سری SIEMENS S7-1200

می‌توانید برای خرید انواع محصولات SIEMENS با مراجعه به فروشگاه ما و یا شماره های تماس با ما در ارتباط باشید.

خرید ماژول ارتباطی پی ال سی زیمنس سری S7-1200 از فروشگاه کالای برق ال جی مزایای بسیاری را به همراه دارد. برخی از این مزایا عبارتند از:
1. اصالت محصول: فروشگاه کالای برق ال جی به عنوان یک فروشگاه معتبر و با سابقه فعالیت طولانی در زمینه فروش محصولات برق و اتوماسیون صنعتی، تضمین میکند تمامی محصولاتی که ارائه می‌دهد اصل و اورجینال هستند. این به شما اطمینان می‌دهد که ماژول ارتباطی پی ال سی زیمنس سری S7-1200 که از این فروشگاه تهیه می‌کنید، دارای کیفیت بالا و استانداردهای بین‌المللی هستند.
2. گستره و متنوع بودن محصولات: فروشگاه کالای برق ال جی دارای مجموعه‌ای گسترده از محصولات زیمنس است. این به شما امکان می‌دهد تا انتخابی دقیق و مناسب برای نیازهای خاص خود داشته باشید. با تنوع محصولات، می‌توانید به آسانی ماژول ارتباطی پی ال سی زیمنس سری S7-1200 هایی با ویژگی‌ها و مشخصات موردنظر خود را بیابید.
3. قیمت رقابتی: فروشگاه کالای برق ال جی تلاش می‌کند تا بهترین قیمت‌ها را به مشتریان خود ارائه کند. این به شما امکان می‌دهد تا با خرید از این فروشگاه، در مقایسه با دیگر فروشگاه‌ها و تامین کنندگان، هزینه‌های خود را کاهش دهید.
4. تحویل سریع و مطمئن: فروشگاه کالای برق ال جی سیستم تحویل سفارشات سریع و مطمئنی را دارد. این به شما امکان می‌دهد تا ماژول ارتباطی پی ال سی زیمنس سری S7-1200 خود را به سرعت دریافت کرده و در پروژه ها و فعالیت‌های خود استفاده کنید.

تمامی محصولات معرفی شده در سایت موجود هستند به دلیل محاسبه قیمت این محصول با یورو و دلار و همچنین متغییر بودن نرخ ارز ، قیمت محصولات در سایت درج نمی شوند لذا خواهشمند است جهت اطلاع از قیمت عمده قطعات ، مشاوره و خرید با فروشگاه تماس بگیرید.

آدرس فروشگاه مرکزی SIEMENS تهران : 

خیابان لاله زار جنوبی - پاساژ ادیسون - پلاک 16 - کالای برق ال جی (آقای جلیلی)
شماره تماس:   

02133948923 - 09934164649

09107872779

The CP 1243-1 communications processor is used for connecting the SIMATIC S7-1200 to telecontrol centers via remote networks and telecontrol protocols (DNP3, IEC 60870-5-104, TeleControl Basic), and for safe communication via IP-based networks. The CP has the following features: • Ethernet-based connection to TeleControl Server Basic, e.g. via Internet • Data transfer of measured values, control variables, or alarms optimized for telecontrol systems • Automatic sending of alert emails • Data buffering of up to 64,000 values ensures a secure database even with temporary connection failures • Secure communication via VPN connections based on IPSec • Access protection via stateful inspection firewall • Support of SINEMA Remote Connect with autoconfiguration • Clearly laid out LED signaling for fast and easy diagnostics • Compact industrial enclosure in S7-1200 design for mounting on a DIN rail • Fast commissioning thanks to easy configuration using STEP 7

CM 1241 communications module

• For quick, high-performance serial data exchange via point-to-point connection • Implemented protocols: ASCII, USS drive protocol, Modbus RTU, 3964(R) • Additional protocols can also be loaded • Simple parameterization with STEP 7 Basic

CM 1242-5

The CM 1242-5 communications module is used to connect a SIMATIC S7-1200 to PROFIBUS as a DP slave and has the following characteristics: • PROFIBUS DPV1 slave in accordance with IEC 61158 • Module replacement without PG supported • Power is supplied via the backplane bus so that no extra cabling is required • Support of all standard baud rates from 9.6 kbps to 12 Mbps • Compact industry-standard enclosure in S7-1200 design for mounting on a DIN rail • Fast commissioning thanks to easy configuration using STEP 7 without additional programming overhead The CM 1242-5 is intended for use in factory automation. Low-cost PROFIBUS-based automation solutions can be created on the basis of the SIMATIC S7-1200 for optimal production.

AS-Interface communication >CM 1243-2 AS-i Master

The CM 1243-2 communications module is the AS-Interface master for the SIMATIC S7-1200 and has the following features: • As many as 62 AS-Interface slaves can be connected • Integrated analog value transmission • Supports all AS-Interface master functions in accordance with the AS-Interface Specification V3.0 • Indication of the operating state on the front of the device displayed via LED • Display of operating mode, AS-Interface voltage faults, configuration faults and peripheral faults via LED behind the front panel • Compact enclosure in the design of the SIMATIC S7-1200 • Suitable for AS-Interface with 30 V voltage and AS-i Power24V: In combination with the optional DCM 1271 data decoupling module, a standard 24 V power supply unit can be used • Configuration and diagnostics via the TIA Portal Design The CM 1243-2 communications module is positioned to the left of the S7-1200 CPU and linked to the S7-1200 via lateral contacts. It has: • Terminals for two AS-i cables (internally jumpered) via two screw terminals each • One terminal for connection to the functional ground • LEDs for indication of the operating state and fault statuses of the connected slaves The screw terminals (included in scope of supply) can be removed to facilitate installation. Function The CM 1243-2 supports all specified functions of the AS-Interface Specification V3.0. The values of the digital AS-i slaves can be activated via the process image of the S7-1200. During configuration of the slaves in the TIA Portal, the values of the analog AS-i slaves can also be accessed directly in the process image

AS-Interface communication > DCM 1271 data decoupling module

With the aid of the DCM 1271 data decoupling module, the AS-Interface network can also be supplied with 24 V DC or 30 V DC from a standard power supply unit and the transmission of data and power can be implemented on one cable. The DCM 1271 data decoupling module has the same type of enclosure as an S7-1200 module and can therefore be perfectly combined with the AS-i Master CM 1243-2. The DCM 1271 data decoupling module has no connection to the backplane bus of the SIMATIC S7-1200 and is therefore not counted as a communications module for the calculation of the maximum configuration. Features of the DCM 1271 data decoupling module • Design: S7-1200, 30 mm wide, degree of protection IP20 • Detachable terminals (included in delivery) • Single data decoupling • Supply of several AS-i networks with a single power supply unit • Operation with 24 V DC or 30 V DC, grounded or non-grounded • Current limitation at 4 A • Integrated ground-fault detection • Diagnostic LEDs for ground faults and overloads • Signaling contact for ground-fault detection Ground-fault detection The integrated ground fault detection functions with grounded and non-grounded power supply: The connection of negative pole and ground (upstream from the data decoupling module) customary with 24 V DC power supplies is permitted. A ground fault to the negative or positive pole on the AS-Interface network (behind the data decoupling module) is identified and signaled via LED and a transistor output.

CM 1243-5

The CM 1243-5 communications module is used to connect a SIMATIC S7-1200 to PROFIBUS as a DP master and has the following characteristics: • PROFIBUS DPV1 master in accordance with IEC 61158 • Support of up to 16 PROFIBUS DP slaves • Communication with other S7 controllers based on S7 communication • Allows programming devices and operator panels with PROFIBUS interfaces to be connected to the SIMATIC S7-1200 • Module replacement without programming device supported • Support of all standard baud rates from 9.6 kbps to 12 Mbps • Compact industrial enclosure in SIMATIC S7-1200 design for mounting on a DIN rail • Fast commissioning thanks to easy configuration using STEP 7 without additional programming overhead The CM 1243-5 is intended for use in factory automation. Low-cost PROFIBUS-based automation solutions can be created on the basis of the SIMATIC S7-1200 for optimal production.

CSM 1277 unmanaged

• Unmanaged switch for connecting a SIMATIC S7-1200 to an Industrial Ethernet network with a line, tree or star topology • Multiplication of Ethernet interfaces on a SIMATIC S7-1200 for additional connection of up to three programming devices, operator controls, and further Ethernet nodes • Simple, space-saving mounting on the SIMATIC S7-1200 DIN rail • Low-cost solution for implementing small, local Ethernet networks • Connection without any problems using RJ45 standard plug connectors • Simple and fast status display via LEDs on the device • Integral autocrossover function permits use of uncrossed connecting cables

CP 1243-1

The CP 1243-1 communications processor is used for connecting the SIMATIC S7-1200 to telecontrol centers via remote networks and telecontrol protocols (DNP3, IEC 60870-5-104, TeleControl Basic), and for safe communication via IP-based networks. The CP has the following features: • Ethernet-based connection to TeleControl Server Basic, e.g. via Internet • Data transfer of measured values, control variables, or alarms optimized for telecontrol systems • Automatic sending of alert emails • Data buffering of up to 64,000 values ensures a secure database even with temporary connection failures • Secure communication via VPN connections based on IPSec • Access protection via stateful inspection firewall • Support of SINEMA Remote Connect with autoconfiguration • Clearly laid out LED signaling for fast and easy diagnostics • Compact industrial enclosure in S7-1200 design for mounting on a DIN rail • Fast commissioning thanks to easy configuration using STEP 7

CP 1242-7 GPRS

The CP 1242-7 GPRS V2 communications processor is used to connect a SIMATIC S7-1200 to the globally available GSM/GPRS mobile radio network and has the following characteristics: • Worldwide wireless exchange of data between S7-1200 controllers and/or between S7-1200 controllers and control centers with an Internet connection • Communication based on the GPRS (General Packet Radio Service) mobile wireless service with data transmission speeds of up to 86 kbps in the downlink and 43 kbps in the uplink • GPRS mode with fixed IP addresses and dynamic IP addresses with standard mobile phone contract • Time synchronization based on NTP (Network Time Protocol) • Sending and receiving of text messages • LED signaling for fast diagnostics • Compact industrial enclosure in S7-1200 design for mounting on a DIN rail • Fast commissioning thanks to easy configuration using STEP 7 In conjunction with the TeleControl Server Basic software, the CP 1242-7 forms a telecontrol system with additional properties: • Connection of up to 5000 telecontrol stations to the control center via an OPC interface • Data buffering in the substations in the event of connection failures • Central status monitoring of the substations • No special provider services required for fixed IP addresses • Teleservice access with STEP 7 to the substations via the Internet The CP 1242-7 V2 is a new product version of the CP 1242-7. The concept for process data transmission has been expanded with a simple data point configuration, which enables substantially easier commissioning without high programming overhead and minimizes susceptibility to errors during the projects implementation phase. CP 1242-7 has also been equipped with new functions, such as access to the internal web server of the S7-1200. This opens up numerous new application areas.

CP 1243-7 LTE

CP 1243-7 LTE is used to connect the S7-1200 to a mobile wireless 4th Generation LTE (Long Term Evolution) network. The increased data rates compared to GPRS and widespread introduction of LTE open up new areas of application. The CP1243-7 is characterized by the following properties: • 1 connection to LTE (4G) mobile wireless network (various versions for EU and North America) • Data transfer of measured values, control variables, or alarms optimized for telecontrol systems • Operation with fixed IP addresses and dynamic IP addresses with standard cellular phone contract • Time synchronization based on NTP (Network Time Protocol) • "On-demand" connection setup via voice call or SMS • Sending and receiving of SMS • Teleservice access with STEP 7 to substations via mobile wireless networks • Compact industrial enclosure in S7-1200 design for mounting on a DIN rail • Temperature range in operation: -20°C to +70°C • DIN rail mounting • Diagnostics LEDs (overall status and details) • Integrated security functions (VPN and firewall) • Access to the CPU web server • Fast commissioning due to simplified configuration with STEP 7 • Data buffering of up to 64 000 values ensures a secure database even with temporary connection failures • Support of SINEMA Remote Connect with autoconfiguration

CP 1243-8 IRC

The CP 1243-8 IRC (Industrial Remote Communication) communications processor is used for connecting a SIMATIC S7-1200 via the SINAUT ST7 telecontrol protocol to higher-level ST7 stations or to an ST7 control center. The CP 1243-8 IRC (as of HW2 and firmware V3.0) also offers connection to a DNP3 or IEC-capable control center via a corresponding open DNP3 or IEC 60870-5-104 telecontrol protocol. The CP 1243-8 IRC (as of HW2 and firmware V3.0) also offers connection to a DNP3 or IEC-capable control center via a corresponding open DNP3 or IEC 60870-5-104 telecontrol protocol. The CP has the following features: • Support for telecontrol protocol SINAUT ST7, DNP3, IEC 60870-5-104 • Two WAN connections for selecting the communication paths: - Ethernet-based connection: RJ45 port on the module for connecting external routers, e.g. SCALANCE M - Additional connection configurable via plug-in TS modules • Both WAN interfaces can also be operated simultaneously: Route redundancy • Data transfer of measured values, control variables, or alarms optimized for telecontrol systems • Automatic transmission of alarms per email or text message • Time synchronization based on NTP (Network Time Protocol) or via the SINAUT system • Data buffering of up to 16,000 data frames prevents data loss in the event of temporary connection failures • Secure communication via VPN connections based on IPSec • Access protection via Stateful Inspection Firewall • Support of SINEMA Remote Connect with autoconfiguration • Fast and simple diagnostics via clear LED indicators, STEP 7 and web browser • Compact industrial enclosure in S7-1200 design for mounting on a DIN rail The integrated Ethernet interface and the option of using the TS modules provide flexible connection options for the CP. The following TS modules are available: • TS module RS232 • TS module MODEM • TS module ISDN

SIMATIC RF120C

The SIMATIC RF120C is a communications module for connecting the SIMATIC identification systems directly to the SIMATIC S7-1200. The readers of the RF200/300/1000 RFID systems as well as the MV300/400/500 optical readers can be operated on the SIMATIC RF120C. Integration into the TIA Portal and the uniform plug-in connection systems permit fast and simple commissioning.

SIPLUS CM 1241 communications modules

• For fast, high-performance serial data exchange via point-to-point coupling • Implemented protocols: ASCII, USS drive protocol, Modbus RTU • Additional protocols can also be loaded • Simple parameterization with STEP 7 Basic Note: SIPLUS extreme products are based on SIMATIC standard products. The contents listed here were taken from the respective standard products. SIPLUS extreme-specific information was added.